Skip to main content

04

WGTC3016

Gantry Battery-Pack Dismantling Center (BT40)

Battery-pack dismantling · tray and tab milling · BT40

Designed for dismantling and re-machining battery trays, frames and housings from new-energy vehicles. It mills bottom guards, lower shells and cell tabs during dismantling, completing milling, drilling and chamfering automatically in a single setup for mainstream battery packs.

Get a Quote Technical data

WGTC3016 Gantry Battery-Pack Dismantling Center (BT40)

KEY FEATURES

Key features

01

Built for battery-pack dismantling and re-machining — bottom guards, lower shells and cell tabs

02

BT40 taper for higher rigidity, up to 16000 rpm, 12-station umbrella magazine with 1.8-second tool change

03

Milling, drilling and chamfering in one setup, cutting re-clamping error

04

Syntec CNC system with professional CAM software — 3D visual programming, online and offline

TECHNICAL DATA

Technical data

Travel & table
X-axis travel	3000 mm optional
Y-axis travel	1600 mm
Z-axis travel	500 mm
Table size	3000 × 1600 mm
Max. table load	2000 kg
Feed
Rapid traverse	X 40 / Y 40 / Z 25 m/min
Max. feed rate	X 40 / Y 40 / Z 25 m/min
Cutting feed	1 – 15000 mm/min
Servo rated power	X 3.0×2 / Y 3.0 / Z 3.0 kW
Servo rated torque	X 32×2 / Y 32 / Z 32 N·m
Accuracy
Positioning accuracy	X ±0.05 / Y ±0.02 / Z ±0.02 mm
Repeatability	X ±0.05 / Y ±0.02 / Z ±0.02 mm
Spindle
Spindle taper	BT40 (7/24 taper No.40)
Max. speed	16000 rpm
Drive / tool clamping	Direct-drive / BT40 four-jaw gripper
Spindle balance grade	G1（ISO 1940）
Mounting	Vertical
Tool magazine
Magazine type	Umbrella type
Number of tools	12 tools
Max. tool (dia. / length / weight)	Φ100 mm / 100 mm / 8 kg
Tool change time (tool-to-tool)	1.8 s
Tool-change reducer ratio	1:8
Cooling & power
Power	15 kVA（380 V / 50 Hz）
Air supply	0.6 – 0.9 MPa
Coolant motor power	0.75 kW
Spindle / cutting cooling	Oil cooling / compressed air
Screw & guide lubrication	Automatic guideway oil lubrication
Machine
Overall dimensions	Approx. 4800 × 3200 × 3200 mm
Machine weight	Approx. 13 t
Power requirement	3Φ 380 V / 50 Hz
Ambient temperature	5 – 40 °C (24 h average ≤ 35 °C)
Relative humidity	30 – 75 %
Vibration / grounding	< 0.5 G / < 10 Ω (independent grounding)

Specifications are taken from this model's factory technical data sheet. Custom stroke, fixturing and tool magazine configurations are subject to the final technical agreement.

The X-axis travel of every model can be extended to your workpiece length.

CONFIGURATION

Standard configuration

Gantry battery-module machining center with Syntec system manual (electronic)

Syntec CNC system, servo motors and drives

ABK spindle, up to 16000 rpm

H-grade linear guides on all axes, precision Z-axis screw (HIWIN / T-WIN)

NSK precision Z-axis bearings

MDL precision reducer

Umbrella-type 12-station magazine, BT40 holders

Automatic oil lubrication for screws and guides

Oil-cooled spindle and compressed-air cutting cooling

Accessories: 6 × BT40 holders, 6 × pull studs, 5 × ER32 collets, tool lock seat and wrench, hex keys and screwdrivers, CF card and reader, tool box

When supply is short, components from other brands may be used as substitutes, with no difference in quality or grade.

COMPONENT BRANDS

Key component brands

Brand	Origin	Application
SYNTEC	Taiwan, China	CNC system / servo motors / drives
ABK	Taiwan, China	Spindle (16000 rpm)
HIWIN / PMI	Taiwan, China	3-axis guides (H grade) / Z-axis screw (precision)
NSK	Japan	Z-axis bearing (precision)
MDL	China	Reducer (precision)
Yichu	China	Cable

MACHINE DETAILS

Machine details

Close-ups of this machine. Click any image to enlarge.

WGTC3016 front view — WGTC3016 front viewBattery-pack dismantling

Gantry structure and side guarding — Gantry structure and side guardingBattery-pack dismantling

BT40 spindle and 12-station magazine — BT40 spindle and 12-station magazineBattery-pack dismantling

3000 × 1600 worktable — 3000 × 1600 worktableBattery-pack dismantling

MACHINING FOOTAGE

Machining footage

WGTC3016 battery-pack dismantling lineContinuous machining by the gantry battery-pack dismantling center

FAQ

Frequently asked questions

The machining zone of the WGTC-3027 is fully enclosed with isolation doors and continuous extraction, separating the hazard zone from operators during machining and emergency handling. If a pack ignites, the table travels to the blast-proof station and is sprayed with water immediately; the lifting platform then lowers the pack fully into a 304 stainless steel water tank until the flames are out and the temperature drops, after which it returns to the load/unload station. The station uses smoke and temperature sensors and can start handling within 3 seconds; tank, lifting platform and enclosure are part of the standard supply.

The WGTC-3027 runs at roughly 20 minutes per pack for milling, including loading/unloading and program touch-off. It handles packs from 800 to 2500 mm long, 600 to 1600 mm wide and 100 to 500 mm high, with a maximum load of 3000 kg. Real throughput also depends on the number of tab cuts, milling allowance, tooling and shop-floor logistics — evaluate it against your shift target and a trial cut.

Compatibility is defined by size: 800–2500 mm long, 600–1600 mm wide and 100–500 mm high, covering mainstream passenger and commercial vehicle packs. Tab positions, structural adhesive and tray design vary between brands, so a sample or drawing is needed to evaluate fixturing and programs. The WGTC-3027 reserves interfaces for CCD, 3D vision and laser line scanning to extend positioning and inspection later.

The WGT-3000G suits industrial aluminium, copper and other light alloys as well as U-PVC profiles. The WGTA-4500 and WGTB-6500 use BT30 / BT40 spindle tapers and process steel profiles, aluminium profiles, aluminium-wood composites and copper profiles.

Standard X-axis strokes are 3000 mm (WGT-3000G), 4500 mm (WGTA-4500) and 6500 mm (WGTB-6500). Longer workpieces can be handled with extended strokes built to order, evaluated against workpiece length, fixture layout and shop floor conditions.

WGT-3000G: positioning accuracy X/Y ±0.05 mm, Z ±0.02 mm, repeatability ±0.05 mm. WGTA-4500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.01 mm. WGTB-6500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.02 mm. The bed is stress-relief annealed and paired with imported linear guides, ball screws and servo systems.

Other models

01WGT-3000G4-Axis CNC Fiber Composite Machining Center 02WGTA-45003-Axis CNC Composite Machining Center (BT30)03WGTB-6500Heavy-Duty 3-Axis Profile Machining Center (BT40)05WGTC-3027Fully Enclosed Explosion-Proof Gantry Center (Tab Cutting / Milling)

REQUEST AN ASSESSMENT

Tell us about your machining conditions

Model of interest：WGTC3016 · Gantry Battery-Pack Dismantling Center (BT40)

Workpiece material, section size and length
Required operations: milling / drilling / chamfering / tapping / fiber cutting
Current machining method, capacity targets and expected delivery

Hotline：+86 176 5051 3003
Email：omexlasercnc@gmail.com
WhatsApp / WeChat：+86 176 5051 3003
Address：Room 525, Tower B, Country Garden Phoenix Center, 77 Shunyi Road, Shunhua Street, Jinan Area of China (Shandong) Pilot Free Trade Zone
Business hours：Mon – Sat, 8:30 – 17:30 (GMT+8)